TXQI 42709 Series Crossflow Industrial Cooling Tower
The TXQI-42709 Crossflow Industrial Cooling Tower Series provides open-circuit, induced-draft evaporative cooling for industrial process water circuits and commercial HVAC condenser water systems.
This TXQI series offers 30 kW, 37 kW, 45 kW, 55 kW and 75 kW fan motor ratings with GI, AG, AS and SS construction options. Select the material configuration to suit the project specification, circulating water quality and site environment.
Industrial Crossflow Evaporative Cooling
Air moves horizontally through the cooling tower fill while warm water flows downward through gravity-fed distribution. This open-circuit arrangement rejects heat from circulating water and supports access to water distribution components for inspection and maintenance.
Four Construction Options
- GI: FRP casing and basin with a galvanised steel structure.
- AG: Galvanised steel construction.
- AS: Stainless steel construction.
- SS: FRP casing and basin with a stainless steel structure.
30 kW, 37 kW, 45 kW, 55 kW and 75 kW Fan Motor Options
The 30 kW, 37 kW, 45 kW, 55 kW and 75 kW figures identify fan motor power. Select thermal performance against the required water flow, entering and leaving water temperatures, design wet-bulb temperature and site conditions. Include acoustic requirements, available electrical supply and maintenance access in the equipment selection.
Dimensions and Installation Planning
The nominal cooling tower dimensions are 4,200 mm length × 7,000 mm width × 6,450 mm nominal height. Separate drawings show overall heights of 6,640 mm for AS/AG and 6,810 mm for GI/SS. Confirm the selected construction, approved overall dimensions, support loads and service clearances before installation. Shipping weight depends on the selected construction. Request the weight for the exact variant.
Fan and Water Distribution Features
The range uses wide-profile, low-speed Big Blue fibreglass fans to help reduce mechanical noise in noise-sensitive cooling applications. The patented ImpactDeck® water diffuser helps maintain water coverage at low flow rates and reduce splashing noise.
Maintenance Access
Removable hot-water basin covers provide access to gravity nozzles for inspection and cleaning. Integrated access provisions support routine inspection and servicing of the cooling tower.
Enclosure and Structural Options
GI and SS options combine UV-resistant FRP casing and an FRP basin with galvanised or stainless steel framing. The internal frame carries structural loads independently of the FRP enclosure. AG and AS options use galvanised or stainless steel casing, basin, structural members and hardware respectively.
Request an Industrial Cooling Tower Quote
Contact Tower Thermal with your cooling duty, design water temperatures, flow rate, wet-bulb temperature, water quality and available plant space for a project-specific TXQI cooling tower quotation.
| SKU | TXQI-42709 |
| Brand | TXQI |
| Assembled Length | 4.200m |
| Assembled Height | 6.450m |
| Assembled Width | 7.000m |