The TXQF-32639 QUIETFLOW® Crossflow Cooling Tower Series provides open-circuit, induced-draft evaporative cooling for commercial HVAC condenser water systems and industrial process applications.

Choose from six fan motor ratings—5.5 kW, 7.5 kW, 11 kW, 15 kW, 18.5 kW and 22 kW—and GI, AG, AS and SS material configurations to suit project specifications.

Crossflow Evaporative Cooling

Air moves horizontally through the fill as warm water flows downward. The TXQF QUIETFLOW range incorporates low-speed fibreglass fans and gravity-fed water distribution to support noise-conscious plant design and maintenance access.

Construction Options

• GI: FRP casing with galvanised steel structure.
• AG: Galvanised steel construction.
• AS: Stainless steel construction.
• SS: FRP casing with stainless steel structure.

Published Dimensions and Site Planning

The nominal cooling tower dimensions are 3,200 mm length × 6,300 mm width × 6,350 mm nominal height. The separate drawings show overall heights of 6,640 mm for AS–AG and 6,650 mm for GI–SS. Confirm the selected construction and approved overall dimensions before planning installation clearances.

Fan Motor Selection

Motor power describes fan drive power, not thermal cooling capacity. Select the tower against required water flow, entering and leaving water temperatures, design wet-bulb temperature and site conditions.

Fan and Water Distribution Features

The range uses wide-profile, low-speed “Big Blue” fibreglass fans to help reduce mechanical noise in noise-sensitive cooling applications. The patented ImpactDeck® water diffuser helps maintain water coverage at low flow rates and reduce splashing noise.

Maintenance Access

Removable hot-water basin covers provide access to gravity nozzles for inspection and cleaning. Integrated access provisions support routine inspection and servicing of the cooling tower.

Enclosure and Structural Options

GI and SS options combine UV-resistant FRP casing and an FRP basin with galvanised or stainless steel framing. The internal frame carries structural loads independently of the FRP enclosure. AG and AS options use galvanised or stainless steel casing, basin, structural members and hardware respectively.

Request a Cooling Tower Quote

Contact Tower Thermal with your cooling duty, water temperatures, flow rate, water quality and available plant space for selection support and a project-specific quotation.