Australia: Ph 1300 744 530
Dubai: Ph +971 800 0311 0211
International: Ph +61 7 3077 6044

Heat Exchangers

Heat exchangers are available as an optional configuration to add process separation, improve control, or protect critical equipment while still using an open cooling tower circuit for heat rejection.
  1. Separate process fluid from the cooling tower water to reduce contamination risk and protect product or equipment.
  2. Stabilise performance where water quality varies, while keeping the process side clean and controlled.
  3. Allow different fluids or additives on the process side without putting them into the cooling tower circuit.
  4. Support easier maintenance by isolating and servicing the exchanger without major disruption to the overall system.
  5. Enable practical upgrades by integrating into existing plants where a full system change isn’t viable.

 

×